Generac 45kva generator

Characteristics of the Generator Set In our generators we use 4-stroke, water-cooled, direct injection diesel engines. They are engines of 3, 4 and 6 cylinders in line, or 8, 10, 12, 16, 18 and 20 in V. Naturally aspirated or turbocharged. The electrical system is 12 or 24 Volts DC, includes a starter motor and a battery charging alternator. In this series, the equipment is mounted on a steel profile structure with integrated supports and suitably dimensioned anti-vibration supports. Includes metal fuel tank with exterior fill, visual fuel level indicator and vent pipe. Oil drain tube with integrated cap. The generator is coupled to the motor by means of flexible steel discs ensuring correct alignment, forming a single unit. The synchronous alternator is an AC device with automatic voltage regulator, without rings or brushes, cooled by air circulation. Class H insulation. The excitation system is mounted on the opposite side of the coupling.
 Perkins Engine brand
 Prime Model 1103A-33TG1
 RPM 1800
 Frequency (Hz) 60
 Standby Power (kWm) 55.6
 Standby Power (bhp) 74.6
 Prime power (kWm) 50.5
 Prime Power (bhp) 67.7
 Number of Cylinders 3
 Turbocharged Aspiration Inline Cylinder Configuration Diameter (in - mm) 4.1 - 105 Stroke (in - mm) 4.9 - 127 Displacement, Cylinder (L) 1.1 Displacement, Total (L) 3.3 Oil Consumption (%) 1.5 Filter Type Airflow Dry Element Airflow for Combustion (m3 / sec) 3.9 Preheating System Included
 Power Definitions Standby Power. Applicable for supplying variable electrical load for the duration of the electrical service interruption from a reliable source. Overload capacity is not allowed. Standby power is in accordance with ISO8528 standard. Fuel stopper in accordance with ISO3046, AS2789, DIN6271 and BS5514. Prime power. Applicable for supplying variable electrical load for an unlimited number of hours. The prime power is in compliance with the ISO8528 standard. Ten percent overload capability available in accordance with ISO3046, AS2789, DIN6271, and BS5514